FAIL (the browser should render some flash content, not this).


Oil Analysis - Benefits

Each business has different reasons for implementing an oil analysis program. Reduction in unscheduled downtime, Effective maintenance scheduling, Improved equipment reliability, Reduction in maintenance costs, Maximization of oil change out intervals, Minimization of installation errors, Reduction in machine power consumption... just to name a few.

Mobile Vehicles

WearCheck's oil and wear particle analysis packages cover all three areas of analysis. An assessment of the oil condition reveals whether the system oil is ready to be changed, or if it is fit for further service. Save money by maximizing your oil change out intervals with the confidence that condition monitoring provides. Detection of ingress of contaminants from the manufacturing environment, including process contaminants, dirt, and water alerts you in time to perform filtration service, saving the oil and avoiding unnecessary wear. When the oil condition and contamination is reduced by routine monitoring, system wear will be minimized. WearCheck's analysis can detect subtle changes in the levels of wear metals present in the system oil. Failures due to worn out components can be avoided long before those components are worn out of specification.





Industrial Equipment

WearChecks's oil analysis service detects abnormal equipment condition before that equipment runs into costly repairs, with time to schedule corrective action. This reduces the cost of your repairs. Problems are caught early, minimizing unscheduled, costly downtime. WearCheck helps you to extend the life of your valuable investment. WearCheck's oil analysis program only requires you to take a small sample of the oil from each component being monitored. You are provided with clear and concise directions, forms and sample bottles needed to submit samples to the WearCheck laboratory. Your primary concern as a business is to be profitable. All too often, these days, this requires an increase in profit through a reduction in costs. A well run condition monitoring program will achieve a substantial reduction in manufacturing costs. WearCheck's oil and wear particle analysis packages offer you condition monitoring for your industrial systems. Save money by maximizing your oil change out intervals. Detection of ingress of contaminants from the manufacturing environment, including process contaminants, dirt, and water alerts you in time to perform filtration service, saving the oil and avoiding unnecessary wear.



Aviation

Oil and wear particle analysis is a combination of spectrometric, ferrographic, and filter analysis. when used as part of your quality assurance program, oil and wear particle analysis will detect abnormal wear modes in aviation systems, long before the wear can lead to any serious damage. WearCheck's analysis will indicate when components are near failure. this gives you time to plan maintenance. Worn components can be replaced at your local facility avoiding rental, and shipping charges. In flight shutdowns, as a result of failed critical components, are avoided, as WearCheck's analysis pinpoints the wear signatures of rolling element bearings, gears, splines, and other critical components. WearCheck's filter and ferrographic analysis utilizes the morphology of wear particles to detect specific wear modes. Avoid installation errors, and rapid failures, when analysis detects cutting wear from misaligned components. WearCheck's oil and wear particles analysis will allow you to realize a reduction in the cost of equipment maintenance, and an increase in aircraft availability and reliability.



Marine & Mining Applications

System assurance is a governing aspect of your business. When safety is paramount to your daily operation a condition monitoring program is an inherent part of your procedures. Oil and wear particle analysis is the most widely accepted method of condition monitoring, in use today, for marine systems. Failures at sea, as a result of failed critical components, are avoided, as WearCheck's analysis pinpoints the wear signatures of worn out components.

Uptime is a governing aspect of your business. When the failure of one component can shut-down operation of your mining operation or mill a condition monitoring program is an inherent part of your business. Oil and wear particle analysis is the most widely accepted method of condition monitoring, in use today, for drilling and mining operations. Oil analysis prevents unexpected shut-downs and gives you ample time to schedule maintenance on equipment.

about us      |      services      |      products      |      careers      |      solutions      |      contacts    |    Privacy Policy
Copyright © 2008 GLOBAL OIL SOLUTIONS, all rights reserved